Canon Inner Finisher-L1 Service Manual page 43

Jam Code Jam Types
Staple-free staple jam
1805
1C14 Error avoidance jam
1C16
1C30
1C32
1C35
1C37
1C40
1C77
1F01 Paper feed cancellation jam
1F32 Manual stack insertion jam
1F90 Sequence jam
1F91
1F92
Sensor
-
Post-staple-processing operation timeout error:
The clinch HP sensor (PS15) does not turn off even when 4 seconds have
elapsed after the clinch motor (M9) starts running.
- Assist motor error (E514)
Paddle motor error (E516)
Rear alignment motor error (E530)
Stapler shift motor error (E532)
Return belt motor error (E535)
Front alignment motor error (E537)
Tray shift motor error (E540)
Paddle motor error (E577)
- The finisher receives a paper feed cancellation instruction from the host
machine for paper delivered according to a paper reception notification
signal.
- A paper stack is inserted in the manual staple slit while the stapler unit is
moving. This is not detected when the stapler unit is moving to the staple
replacement position.
- A start response cannot be returned within 60 seconds of receiving a start
request signal.
An operation completion response cannot be returned within 60 seconds
of receiving an operation completion request signal.
- A paper feed completion signal cannot be returned within 15 seconds of
receiving a paper delivery signal.
- The internal status does not change more than 10 seconds after the fin-
isher starts paper stack operation to the processing tray.
36
2. Technical Explanation
Jam description