Staple-Free Staple Unit - Canon Inner Finisher-L1 Service Manual

Front 1-point stapling (45 deg)
Center 2-point stapling
Alignment
front side

Staple-free Staple Unit

Item
Stapling method Pressing by rotating cam
Stapling position See below.
Stapling size A3, A4, B4, B5, 11X17, LTR, 8K, 16K
Stapling capacity A4, B5, LTR, 16K
A3, B4, A4R, 11x17, 8K
Manual stapling None
Rear 1-point stapling (45 deg)
5.0 -/+ 2.0 mm 5.0 -/+ 2.0 mm
Paper size
A3, A4
Alignment
B4, B5
back side
11X17, LTR
A4R
LTRR, LGL
L1
8K, 16K
L2
EXEC
Specifications
52 to 64 g/m
More than 64 to 81.4 g/m
More than 81.4 to 105 g/m
52 to 64 g/m
More than 64 to 81.4 g/m
More than 81.4 to 105 g/m
13.5 + 4.0/- 2.0 mm
3.0 mm or less
8
Manual stapling
5.0 -/+ 2.0 mm
L1 L2 L3
83 -/+ 4.0 203 -/+4.0 5.0 -/+ 2.0
63 -/+ 4.0 183 -/+ 4.0 5.0 -/+ 2.0
74 -/+ 4.0 194 -/+ 4.0 5.0 -/+ 2.0
39.5 -/+ 4.0 159.5 -/+ 4.0 5.0 -/+ 2.0
42.5 -/+ 4.0 162.5 -/+ 4.0 5.0 -/+ 2.0
69.5 -/+ 4.0 189.5 -/+ 4.0 5.0 -/+ 2.0
68 -/+ 4.0 188 -/+ 4.0 5.0 -/+ 2.0
2
: 10 sheets or less
2
: 8 sheets or less
2
: 6 sheets
2
: 5 sheets or less
2
: 4 sheets or less
2
: 3 sheets
Delivery direction
1. Product Overview
Unit (mm)
Pitch
120
120
120
120
120
120
120
Remarks
• Tooth-shaped clinch
• Stapling at four locations
(upper left, upper right,
lower right, lower left) is
possible using the host
machine's LUI through im-
age processing of the prin-
ted surface.
Different depending on the host
machine.
• Stapling a mix of same
width is possible.
• Stapling a mix of different
widths is not possible.