Panasonic VB-44210G User Manual page 82

Chapter 3. System Features
2. Dial "#52."
3. Press the ON/OFF key.
Related Programming
• FF1 (System): Ring Patterns for UNA Terminals (M, C, & B)
• FF4 (Ringing and Hunt Groups): CO Day Ring Assignment
• FF4 (Ringing and Hunt Groups): CO Night Ring Assignment
Hardware Requirements
• Calls during Night Mode are often directed to external paging speakers or
Considerations
• If "#52" is assigned to an FF key on an attendant phone, the attendant can
• If there are two Attendant Phones and both DSS consoles have a NIGHT
• If the system is programmed to switch between night and day modes
Page 3-36
• The ON/OFF LED lights.
• The ON/OFF LED goes off.
• "DAY MODE" appears on the display.
to an external ringing device, such as a night bell. External paging and
ringing devices are not provided with the DBS; they must be purchased
separately.
switch between Day and Night Modes simply by pressing the key. The FF
key lights red when the system is in night mode.
key (programmed on a FF key), both NIGHT indicators will light red
when Night Mode is activated.
automatically, you cannot switch between modes by using "#52."
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700