Panasonic VB-44210G User Manual page 260

Chapter 6. SLT Features
To Cancel an Absence Message
1. Lift the handset.
2. Dial "71."
3. Replace the handset.
Related Programming
• FF1 (System): Extension Class of Service Setting (CPC-AII and CPC-B
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
• FF6 (Names and Messages): Absence Messages
Considerations
• Extensions without displays get a busy signal, rather than the Absence
• If a message code number that has not been assigned a text message is
• Absence Message return times can be entered as shown in Table 6-2:
Table 6-2. Example Return Times for Absence Messages
• In CPC-A and CPC-B Versions prior to 5.0, DND and Absence Messages
6-4
Version 3.1 or higher)
CPC-B Version 3.1 or higher)
Message.
selected, "Absence," followed by the code number, appears on the caller's
display.
Input
No input
9
11
615
1035
Four-digit numbers can also be entered (0000-9999 = Hours & Minutes or
Month & Date).
cancel Call Forwarding.
Beginning with CPC-B Version 5.0, calls to extensions with DND or
Absence Message turned on are treated differently, depending on whether
they are trunk or intercom calls. Intercom calls receive busy tone; trunk
DBS Manual - Revised April 2000
Section 700 - Operation
Display
Return
Return 9:00
Return 11:00
Return 6:15
Return 10:35
DBS-2.3/9.2-700