Chapter 6. SLT Features
5. Remain on the line until the called party picks up.
To answer Call Waiting (and disconnect the current call):
1. Replace the handset.
2. Pick up the handset.
To answer Call Waiting (without disconnecting the current call):
1. Flash the switchhook.
2. Flash the switchhook again to retrieve the original call.
Related Programming
• FF1 (System) Extension Class of Service Setting (CPC-AII and CPC-B
• FF3 (Extension): Extension Class of Service Assignment (CPC-AII and
• FF3 (Extension): Call Waiting/OHVA
Considerations
• Call Waiting can be used without entering a message code.
• Extensions that have DND activated, have a call on hold, are ringing (from
• Call Waiting cannot be sent to an ML key.
6-18
The current call is disconnected.
You are automatically be connected to the extension sending the Call
Waiting.
• The current call is disconnected.
• The new call is connected automatically.
Version 3.1 or higher)
CPC-B Version 3.1 or higher)
another call), or are engaged in a conference call cannot receive Call
Waiting.
DBS Manual - Revised April 2000
Section 700 - Operation
DBS-2.3/9.2-700