Panasonic VB-44210G User Manual page 135

Section 700 - Operation
• "Hold TRK #XX" (where "XX" is the outside line number) appears on the
To release a call placed on System Hold from the extension that
placed it there:
Press the line key that is flashing green.
• The line LED stops flashing and remains lit.
• "CO TALK #XX" (where "XX" is the outside line number) appears on the
To release a call placed on System Trunk Hold from a different
extension:
Press the line key that is flashing red.
• The line LED turns green and stops flashing.
• "CO TALK TRK #XX" (where "XX" is the outside line number) appears
Related Programming
• FF1 (System): Recall Timer for Attendant-Held CO Calls
• FF1 (System): Recall Timer for Attendant-Held Intercom Calls
• FF1 (System): Recall Timer for Extension-Held CO Calls
• FF1 (System): Recall Timer for Extension-Held Intercom Calls
• FF1 (System): Trunk Line Automatic Hold
• FF1 (System): Non-Appearing Central Office Line Hold
Considerations
• When using an outside line for which there is no line key on your
DBS-2.3/9.2-700
display.
display.
on the display.
extension, press the HOLD key to place the call on hold and then press a
vacant line key. Release the held call by pressing HOLD again. (System
programming determines whether the call will be placed on Exclusive
Trunk Hold or System Trunk Hold.)
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
4-19