Table of Contents
Advertisement
Section 700 - Operation
6. Enter the telephone number.
7. Press the HOLD key.
8. Press the ON/OFF key.
To check a programmed One-Touch key:
1. Press the ON/OFF key.
2. Press the CONF key.
3. Press the One Touch key to be checked.
4. Press the ON/OFF key.
Considerations
• If the pause following an access code is too short, press the REDIAL key
• A One-Touch key can be programmed to automatically access a CO line
• Select an outside line group when you program a One-Touch key. A free
DBS-2.3/9.2-700
The ON/OFF LED goes off.
• The phone issues intercom dial tone.
• The ON/OFF LED lights.
"C" appears in the display.
The programmed data appears on the display.
• The ON/OFF LED goes off.
• The date and time appears on the display.
more than once.
before dialing a personal speed dial number.
line is selected from that group when you dial out. (Group 9 can be
programmed to select LCR automatically.) The following table shows the
available outside line groups and their corresponding code numbers:
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
4-77
Hide quick links:
Advertisement
Table of Contents
