Call Duration Display - Panasonic VB-44210G User Manual

Section 700 - Operation
For example, if an outside call on line 1 is sent to extension 135, but
extension 135 is busy or does not answer, the call will ring at the covering
phone and "TRK #01> 135" will appear on the covering phone's display.
If two extensions are designated as covering phones and one of them is in
DND, the second will receive the call.
Call coverage assignments are controlled through system programming,
rather than from individual extensions.
For extension-controlled routing of unanswered calls, see "Call Forwarding"
on page 4-11.
Related Programming
• FF3 (Extension): Offhook Signal
• FF4 (Ringing and Hunt Groups): Call Coverage Group Member Table
Considerations
• Up to sixteen Call Coverage Groups can be programmed into your system.
• A member of one Call Coverage Group cannot belong to another Call
• A Single-line telephone (SLT) or Digital Single Line telephone (DSLT)
• Calls to an extension in DND do not cover.
• Calls to an extension with Call Forwarding activated do not cover.
• If the Call Forwarding feature or the Absence Message feature is activated
• Voice intercom calls do not activate call coverage. Only tone intercom

Call Duration Display

(All Versions)
Description
DBS-2.3/9.2-700
A Call Coverage Group can have up to two covering phones and up to six
extensions.
Coverage Group or to a Hunting Group.
can be a member of a coverage group, but cannot be a covering phone.
for covering phone No. 1, covering phone No. 2 will "cover" the other
extensions in the group.
calls can activate call coverage.
DBS Manual - Revised April 2000
Chapter 4. Key Telephone Features
4-9