Knife Chain - Sharp MX-TMX1 Service Manual

AREA C

3.2.19 KNIFE CHAIN

WARNING
Place the safety block [D] between lower knife and upper knife beam. When
removing the chain nothing holds upper knife beam and knife in position.
[E]
[D]
Removal
1. Remove Rear cover (
2. Remove retaining ring [A].
3. Loosen screws [B] holding the motor (
4. Remove sprocket [C].
Replacement
1. If it is difficult to mount sprocket [C] remove master link [E].
2. Reverse the removal procedure.
3. Tension the chain so there is no slack when tightening screws [B] (
[B] [A]
[C]
3.1.1).
TR-3-34
x3).
20 October 2010
x3).