Table of Contents
Advertisement
20 October 2010
3.2.10 STOP GATE CARRIAGE
[A]
Removal
1.
Before switching off the power,
set the Trimmer (Paper size) to A4 / 8.5x11" and Trimming to off.
2.
Remove Lower outfeed cover (
3.
Remove connectors [A] (
4.
Remove connectors [B] (
5.
Remove connector [C] (
6.
Pull out the Carriage gently.
CAUTION
When removing the Carriage, watch out so the motor connectors [B] & [C]
do not get damaged by the side frame cut-outs.
Replacement
1.
When positioning the carriage in place, make sure the two sliding rods and the
gear rack enters their holes and slot.
2.
Reverse the removal procedure.
[B]
[D]
3.1.8).
x2).
x2).
x1).
TR-3-25
[C]
AREA C
Advertisement
Table of Contents
