20 October 2010
3.2.14 LOWER OUTFEED BELTS
Removal
1.
Remove Stop gate carriage (
2.
Remove Paper path (
3.
Remove Transmission chain (
4.
Remove screws [A] (
5.
Remove e-clip [B] (
6.
Slide Flange bushing [C] towards the center of the shaft and tilt the shaft out
through the cut-out in the side frame.
Replacement
1.
Reverse the removal procedure.
Adjustment
1.
Loosen screws [A] (
2.
The belts should be adjusted so they have no slack and even tension.
3.
Pull shaft [D] to obtain adjustment and tighten screws [B] (
[A]
[D]
3.2.10).
3.2.9).
3.2.17).
x2).
x1).
x2).
TR-3-29
[A]
[B]
[C]
x2).
AREA C