Top Cover - Sharp MX-TMX1 Service Manual

COVERS

3.1.2 TOP COVER

[B]
[A]
Bad
Top cover too low
Removal
1. Pry off the Gas spring [A] using a screw driver.
2. Remove screws and nuts [B] (
Replacement
1. Reverse the removal procedure.
Adjustment
1. Loosen screws and nuts [B] (
2. Adjust Top cover so frame edge [C] is aligned with top of the hinge [D].
See drawings above.
3. Tighten screws and nuts [C] (
Good
Top cover too high
x4, x4).
x4, x4).
x4, x4).
TR-3-2
20 October 2010
[B]
[C]
[D]
Bad