Setting The Variables - Nokia EM5400 Installation Manual

ls
Use the ls command to view the contents of directories on the devices in your
Nokia EM5400 appliance. The command has the following syntax:
ls device directory
where device is the device containing the directory to view, and directory is
the directory on that device. Both device and directory are optional. The
default directory is /image on the wd0 device.
For example:
BOOTMGR[2]> ls wd0 /image/current
.description
VERSION
bin

Setting the Variables

This section describes how you set variables with the boot manager.
setenv
Use the setenv command to set a particular variable. The command has the
following syntax:
setenv name value
where name is the name of the variable, and value is the new value for the
variable to assume.
For example, the following command sets the value of autoboot to YES:
BOOTMGR[2]> setenv autoboot YES
Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
bootmgr etc
cdrom ipso.tgz
dev kernel
Boot-Manager Variables
kernel.debug
mnt
sbin
usr
web
65