Table of Contents
Advertisement
Network Voyager to Manage Your Appliance"
Network Voyager Inline Help for IPSO"
To open Nokia Network Voyager
1. Start a Web browser on the host you plan to use to configure or monitor
2. In the Location or Address field, enter the IP address of the initial
Note
If the username login screen does not appear, you might not have a
physical network connection between the host and your appliance, or you
might have a network routing problem. Confirm the information you
entered during the initial configuration and check that all cables are firmly
connected. For more information, see
Viewing Nokia IPSO Documentation by Using
Nokia Network Voyager
As you use
Guide for the version of IPSO you are using and Network Voyager inline help
(context-sensitive help) are available for you to use.
You can access both information sources from the Voyager interface, as
Figure 9
Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
Viewing Nokia IPSO Documentation by Using Nokia Network Voyager
your appliance.
interface you configured for the appliance.
You are prompted to enter the admin username and the password you
entered when you performed the initial configuration.
Nokia Network
shows.
on page 42 and
on page 45.
Chapter 8, "Troubleshooting."
Voyager, the Nokia Network Voyager Reference
"Nokia
43
Advertisement
Table of Contents
