Storing System Logs on the Flash-Memory PC
Card
You can use the flash-memory PC card to store system log messages. Use
Nokia Network Voyager to configure the PC card as an optional disk. After
you reboot the Nokia EM5400 IP Security Platform appliance, use Network
Voyager to configure system logging options. For more information, see the
Nokia Network Voyager Reference Guide.
If you configure the flash-memory PC card as an optional disk, you must
perform one of the following procedures before you remove the PC card.
To use Nokia Network Voyager to disable a PC card you use for
storing system logs before you remove it
1.
2. Click Apply.
3. Click Up.
4.
5. Click Apply.
6. Click Save.
7. Click Up.
8. Click Reboot, Shut Down System to shut down or reboot the appliance.
You can now remove the PC card.
To use the CLI to disable a PC card you use for storing system
logs before you remove it
1. Enter the following command:
Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
Click System Logging under System Configuration and check the
Unselect check box.
Click Optional Disks under System Configuration and click the Off
radio button under Local Logging.
set syslog local-log off
Storing System Logs on the Flash-Memory PC Card
55