Viewing Other Distances In Feet Or Meters - NorthStar 961 User Manual

Table 2: Alarm display settings
Display setup screen
Distance/ Distance
speed precision
nm/kts normal
nm/kts high
mi/mph normal
mi/mph high
km/kph normal
km/kph high

Viewing other distances in feet or meters

There are six other screens where you now can display small
distances in either feet or meters. To do so, you must set the 961/
962 distance precision on the DISPLAY SETUP screen to high (if
set to normal, the 961/962 won't display feet or meters). These
screens include:
the CHART screen and the CHART screen INFO BAR
•
the 3-D STEER screen and the traditional STEER screen
•
the TRIP screen
•
the ROUTES screen
•
On the chart screen
On the CHART screen, when you press the &85625 3$' to view
the distance to the cursor, you now can see this distance
measured in feet or meters, not only in fractions of a mile,
nautical mile, or kilometers.
If you've set your distance/speed to miles, the 961/962 will
display the number of feet until the distance to the cursor
Addendum P/N GM1709
Alarm screen
Original
Equivalent
alarm
display
display
nm yd (yards)
nm ft (feet)
mi yd
mi ft
km M (meters)
km M
– 8 –
10/15/00