Displaying Waypoints - NorthStar 6000i Quickstart Manual And Reference Manual

Displaying waypoints

To display waypoints, press the
WAYPTS/ROUTES key, then
You can press
the four available waypoint screens listed
below:
The waypoint screen type is shown in the
upper right corner.
Waypoints on the chart screen
The
waypoints graphically. You can press the
cursor pad to display other areas of the
chart, and press the OUT or IN zoom keys
to see more or less chart area.
Reference section 4 — Creating waypoints and routes
64

Displaying waypoints

Next view to step through
• waypoints displayed on the chart
• a list of up to 30 local waypoints, sorted
by distance (nearest first)
• a list of all waypoints, sorted
alphabetically
• a list of up to 30 local avoidance
waypoints, sorted by distance (nearest
first)
WAYPOINTS CHART screen displays your
NOTE:
If you've turned off the display of way-
points on the screen, you'll only
CHART
see waypoints that are currently in use for
navigation.
Waypoints on the local list
Waypoints .
The WAYPOINTS (LOCAL)
to 30 of the closest waypoints (within 100
nm) in order of their distance from your
present position. This list is particularly
useful for working with the waypoints in
your area. Often these are the only
waypoints you may be interested in at the
moment.
Waypoints on the alpha list
WAYPOINTS (ALPHA)
The
stored waypoints in alphabetical order.
Waypoints with a digit as the first char-
acter appear at the beginning of the list.
Those starting with a dash or parenthesis
are at the end.
Waypoints on the avoidance list
WAYPOINTS (AVOIDANCE)
The
up to 30 of the closest avoidance
waypoints (within 100 nm) in order of
distance from your present position.
Using the waypoint lists
After you've stored a few waypoints in the
6000i, you can press the cursor pad to
screen displays up
screen displays all
screen displays
Northstar 6000i