Changing The Time Zone - NorthStar 6000i Quickstart Manual And Reference Manual

N2 status screen
The N2 status screen lists all operating
units connected to the N2 network for
troubleshooting:

Changing the time zone

Press the STAR key until you see the
OF DAY
zone, and time of today's sunrise and
sunset are shown.
The current time is displayed in the center
of the screen. When shipped from the
Reference section 10 — Setup
166

Changing the time zone

1. On the
OPTIONS/SERVICE INFO
press More to display the
screen.
/ SERVICE INFO
N2 status. All units are listed with
2. Press
their model number and serial number.
screen. The time, date, local time
The unit you are currently operating is
identified with the text "
Using the LCD test key
screen,
From the
MORE OPTIONS
test . This function is used for factory
testing of the unit's screen, and it simply
displays a blank screen. Press any function
key to return to another screen.
TIME factory, the time zone is set to "GMT"
(Greenwich Mean Time).
Note that the day of the week in Green-
wich, England may be different from the
day in your local time zone.
To change the time zone used for all of the
6000i's time displays, press
use the cursor pad to select the desired
zone and standard or daylight time. Press
ENTER to use the new time zone.
(me) ."
LCD
DIAGNOSTICS
screen, press
Time zone , and
Northstar 6000i