NorthStar 6000i Quickstart Manual And Reference Manual page 62

From here, you can do the following:
Selecting the starting point
The nearest waypoint in the route is auto-
matically selected as the starting point. To
choose a different waypoint or route leg,
press the cursor pad and select it on the
chart. You can zoom IN or OUT to see a
smaller or larger area of the route.
Reference section 3 — Navigating to Waypoints
58
Navigating along routes
Chart screen, showing a route
• select a starting waypoint or leg
• start following the route
• reverse the route
Starting a route
To go directly to the selected waypoint in
Go to waypt , then press
the route, press
ENTER . The 6000i calculates a track line
from your present position to the selected
route waypoint. Your cross track error
starts at zero.
If you wish to start navigating along a
route leg, rather than directly to a
waypoint, select the leg by moving the
cursor onto the leg, then press
and press ENTER . In this case, your initial
cross-track error is your distance from that
leg. The leg you're currently navigating
along is displayed with arrows indicating
your chosen direction of travel; other legs
are displayed with fewer arrows.
Reversing a route
To follow the route in the reverse direc-
Reverse before starting the
tion, press
route. The direction of the route and its
arrows will change from end to end.
Follow leg
Northstar 6000i