Replacing A Display Module - Huawei NetCol5000-C030 User Manual

NetCol5000-C(030, 032, 065) In-row Chilled Water
Smart Cooling Product
User Manual

7.4.13 Replacing a Display Module

● Do not frequently or quickly disconnect or connect the DP cable of the display
module. Do not forcibly pull the DP cable.
● You are advised to power off the main control board (or main control module)
and then replace the display module.
Step 1 Open the front door with caution to prevent damaging the controller cables.
Step 2 Remove the cables from the display module.
Step 3 Use a Phillips screwdriver to remove the four screws and gaskets that secure the
display module, and pull out the display module.
Figure 7-21 Replacing a display module (NetCol5000-C065)
Figure 7-22 Replacing a display module (NetCol5000-C030/C032)
Issue 06 (2022-12-15)
CA UTION
Copyright © Huawei Digital Power Technologies Co., Ltd.
7 System Operation and Maintenance
156