Parameter Copy - Mitsubishi Electric FATEC FR-A800 Manual

2
UNDERSTANDING INVERTER SYSTEM
2.5.6

Parameter copy

The parameter setting values for one inverter can be copied to multiple inverters.
Pr.CPY setting
0.---
1.RD
2.WR
3.VFY
(1) Reading the parameter settings of the inverter to the operation panel
1.
Connect the operation panel to the source inverter.
Parameter setting mode
2.
Press
Selecting the parameter
3. Turn
"
Reading the setting to the operation panel
4. Turn
operation panel. (It takes approximately 30 seconds to read all the settings. During reading, "
End reading
5.
" " and "
(2) Copying parameter settings read to the operation panel to the inverter
1.
Connect the operation panel to the target inverter.
Parameter setting mode
2.
Press
Selecting the parameter
3. Turn
"
Selecting the parameter copy
4. Turn
"
Copying the settings to the inverter
Press
5.
During copying, "
● Perform this step when the inverter is stopped. (Parameter settings cannot be copied during operation.)
Ending copying
6.
" " and "
After parameters are written to the destination inverter, always reset the inverter before operation by, for example,
7.
turning OFF the power.
Initial display
Copy the source parameters to the operation panel.
Write the parameters stored in the operation panel to the target inverter.
Verify the parameters in the inverter and operation panel.
to choose the parameter setting mode. (The parameter number read previously appears.)
to " " (Parameter copy), and press
" appears.
to change the set value to "
" are displayed alternately after settings are read.
to choose the parameter setting mode. (The parameter number read previously appears.)
to " " (Parameter copy), and press
" appears.
to change the set value to "
" appears.
to start copying the settings to the inverter. (It takes approximately 60 seconds to copy all the settings.
" blinks.)
" are displayed alternately after settings are copied.
2.5 How to use the operation panel FR-DU08
Description
Operation
.
". Press to start reading the parameter settings by the
Operation
.
", then press .
1
2
3
4
" blinks.)
5
6
7
8
17