Parameter Display By Function Group - Mitsubishi Electric FATEC FR-A800 Manual

2
UNDERSTANDING INVERTER SYSTEM
2.5.4

Parameter display by function group

Parameter numbers can be displayed by function group.
Since the parameter numbers are grouped by function, related parameters can be set easily.
(1) Changing to parameter numbers grouped by function
Pr.MD setting
0
1
2
1. Turning ON the power of the inverter
The operation panel is in the monitor mode.
Parameter setting mode
2.
Press
Selecting the parameter
Turn
3.
Press
Changing to the group parameter display
Turn
4.
setting. "
(2) Changing the parameter setting value with group parameter display
The following explains how to change the setting value of H400 (Pr.1) Maximum frequency from
"120 Hz" to "60 Hz".
1. Turning ON the power of the inverter
The operation panel is in the monitor mode.
Changing the operation mode
2.
Press
Parameter setting mode
3.
Press
Selecting the parameter group
4.
Press
Selecting the parameter group
Turn
5.
"
selected.
Selecting the parameter
6. Turn
value. "
Changing the setting value
7. Turn
"
Default parameter display
Parameter display in numerical order
Parameter display by function group
to choose the parameter setting mode. (The parameter number read previously appears.)
until " " (Group parameter setting) appears.
to confirm the selection. The setting "
to change the set value to " " (group parameter display). Press
" and " " are displayed alternately after the setting is completed.
to choose the PU operation mode. The [PU] indicator turns ON.
to choose the parameter setting mode. (The parameter number read previously appears.)
several times until "
until " " (Protective function parameter 4) appears. Press
" will appear, and the parameters in the function group of protective function parameter 4 can be
until " " (P.H400 Maximum frequency) appears. Press
" (initial value) appears.
to change the set value to "
" are displayed alternately after the setting is completed.
2.5 How to use the operation panel FR-DU08
Description
Operation
" (initial value) will appear.
Operation
appears. The parameter group can be selected.
"
". Press to enter the setting. "
to confirm the group parameter
to confirm the selection.
to read the present set
" and
15
1
2
3
4
5
6
7
8