Parameter Clear / All Parameter Clear - Mitsubishi Electric FATEC FR-A800 Manual

2
UNDERSTANDING INVERTER SYSTEM
2.5.5

Parameter clear / all parameter clear

Set Pr.CLR Parameter clear or ALL.CL All parameter clear to "1" to initialize parameters.
(Parameters cannot be cleared when E400 (Pr.77) Parameter write selection = "1".)
1. Turning ON the power of the inverter
The operation panel is in the monitor mode.
Changing the operation mode
2.
Press
Parameter setting mode
3.
Press
Selecting the parameter
4. Turn
" " (initial value) appears.
Parameter clear
Turn
("
5.
Setting
0
1
2.5 How to use the operation panel FR-DU08
16
to choose the PU operation mode. The [PU] indicator turns ON.
to choose the parameter setting mode. (The parameter number read previously appears.)
to " " for parameter clear or to "
to change the set value to "
") are displayed alternately after parameters are cleared.
• Turn to read another parameter.
• Press
• Press
Pr.CLR Parameter clear
Initial display (parameters are not cleared.)
The settings of parameters except for
calibration parameters and terminal function
selection parameters are initialized.
Operation
" for all parameter clear, and press
". Press to enter the setting. "
to display the setting value again.
twice to display the next parameter.
Description
The settings of all the parameters, including
calibration parameters and terminal function
selection parameters, are initialized.
" and " "
ALL.CL All parameter clear
.