Monitoring Of Output Current And Output Voltage; 2.5.10 First Monitored Item - Mitsubishi Electric FATEC FR-A800 Manual

2
UNDERSTANDING INVERTER SYSTEM
2.5.9

Monitoring of output current and output voltage

Press
frequency, output current, and output voltage.
1.
Press
Press
2.
mode. [A] appears.
3.
Press

2.5.10 First monitored item

The first monitored item to be displayed in the monitor mode is selectable.
To set a monitored item as the first monitored item, display a monitored item, and press
while.
Changing example
1.
Select the monitor mode, and select the output current.
2.
Press
3.
When the monitor mode is selected next time, the output current is monitored first.
2.5 How to use the operation panel FR-DU08
20
on the operation panel in the monitor mode to switch the monitor item between output
during operation to monitor the output frequency. [Hz] indicator turns ON.
to monitor the output current. This operation is valid during running or stopping under any operation
to monitor the output voltage. [V] appears.
Set the output current as the first monitored item.
for a while (one second). The output current is set as the first monitored item.
Operation
Operation
for a