9
REPLACEMENT PROCEDURE
9.2
Setting the parameter
(1) Prepare a personal computer where FR Configurator2 (SW1DND-FRC2-E) is installed and a
cable for inverter connection.
(2) Turn ON the FR-A800.
(3) Connect the personal computer with the FR-A800.
(4) Turn ON the computer and start up the FR Configurator2 (SW1DND-FRC2-E). Click the
[Parameter List] in the [Parameter] menu, or click
List".
(5) While displaying the parameter list window, select [Open] in the [File] menu, or select
tool menu of the parameter list window to open the parameter file to save in Section 9.1(11).
9.2 Setting the parameter
144
USB host
(A connector)
Communication status LED indicator
USB device
(mini B connector)
on the toolbar to display "Parameter
in the