Precautions For Replacement - Fujitsu M10 Product Notes

Figure 8-36

Precautions for Replacement

Pay attention to the point below on link cable replacement.
Before using the link cable, confirm that labels of a same number (0 or 1) are
■
attached to the connectors at both ends.
If no label is attached, attach labels supplied with the link cable so that the same
number is displayed on the connectors at both ends. For state of the labels
correctly attached, see Figure 8-37. For attachment positions, see Figure 8-38 and
Figure 8-39.
Figure 8-37
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2043 ･ October 2013
116
Removing link cable
A
State of labels correctly attached
0 0
1 1