Forced Unscreened Transfer; Auto Time Stamp; System Administrator; Dialing Option - NEC IntraMail 4 System Manual

Options
N (6) - No
■
Y (9) - Yes
■
Default
✔ N (6) - No

Forced Unscreened Transfer

(FORCE UTRF)
Use this option to enable or disable Automated Attendant Forced Unscreened Transfer for the Subscriber
Mailbox. If enabled, each Screened Transfer (TRF) to the extension is converted to an Unscreened Transfer
(UTRF). If disabled, Screened Transfers from the Automated Attendant occur normally.
See Forced Unscreened Transfer on page 90 for more.
■
Options
N (6) - No
■
Y (9) - Yes
■
Default
✔ N (6) - No

Auto Time Stamp

(AUTO TIME STAMP)
Use this option to enable or disable Auto Time Stamp for the Subscriber Mailbox. If enabled, after the sub-
scriber listens to a message IntraMail will announce the time and date the message was left. Auto Time
Stamp will also announce the message sender (if known).
A subscriber can also enable Auto Time Stamp from their mailbox.
See Auto Time Stamp on page 41 for more.
■
Options
N (6) - No
■
Y (9) - Yes
■
Default
✔ N (6) - No

System Administrator

(SYSTEM ADMIN)
Use this option to designate the Subscriber Mailbox as a System Administrator. This allows the subscriber to
use the SA
See System Administrator on page 171 for more.
■
Options
N (6) - No
■
Y (9) - Yes
■
Default
✔ N (6) - No

Dialing Option

(DIALING OPTION)
Dialing Option provides additional dialing options for Next Call Routing Mailbox calls (see Next Call Rout-
ing Mailbox below). If enabled, a caller who accesses the Subscriber Mailbox to leave a message can dial
any of the options in the Next Call Routing Mailbox's Dial Action Table. If disabled, the caller can only dial
0 (to use the Next Call Routing Mailbox's 0 action).
See Next Call Routing Mailbox on page 148.
■
Options
N (6) - No
■
Y (9) - Yes
■
Default
✔ N (6) - No
IntraMail System Guide
1808 - IntraMail Subscriber Mailbox Options
options after logging onto their mailbox.
1800 - Extension Options
Chapter 3: Programming ◆ 205
3