1801 Program Entry - NEC IntraMail 4 System Manual

1801 Program Entry

ICM + #*#* + Password (372000) +
EXTENSION #
PT TYP
EXT
NAME
DOOR CHIME
RELAY OWNER
DSS TYPE
DSS BLOCK NUM
CLASS OF SERVICE
STA TOLL LVL DAY
STA TOLL LVL NITE
ACCESS LVL
OVRFLW EXT
DID OVRFLW B-R-D
Press this:
HOLD Enter (accept) data you entered, advance to the next prompt without changing your entry, or nav-
igate to the next prompt level.
CONF Cancel your entry and back up to the previous prompt level.
▲ ▼
VOL or Vol Scroll to the next prompt on the same prompt level.
LND Erase the entry to the left of the cursor.
CHECK Restore the previous entry.
CLEAR Clear the entry from the display (unless otherwise noted).
IntraMail System Guide
1801 - Extension Port Description
1801 - Extension Port Description
(Entry Range) [Default Setting]
HOLD + 1801 + HOLD .
(Any valid extension number) [300]
(The following circuit type options are available:)
00=uninstalled
01=22-Button Standard
02=22-Button Display
06=34-Button Display
09=34-Button Super Display
10=Door Box
15=Analog Station
21=2-OPX Module)
[By default, digital station ports automatically detect the type of connected device
when the keyset, 2-OPX Module or Digital Door Box is plugged in. If no device is
connected, the default setting is circuit type 02.]
• To scroll through the available types:
- Press ICM (the ICM key flashes)
- Press VOL ▲ or VOL ▼ to scroll through the entries.
- Press HOLD to accept the displayed entry.
(Extension number - view only)
(Name) [No names entered]
When entering names, see the
(For Door Boxes only: 0=Normal Ring Group ringing, 1=Low pitch chime pattern,
2=Mid range pitch chime pattern, 3=High pitch chime pattern) [0]
(For Door Boxes only:)
(DS1000: 0 = Relay not assigned, 1=Relay assigned to DOOR1, 2=Relay
assigned to DOOR2) [0]
(DS2000: 0=CPU relay not assigned to Door Box, =CPRU Relay assigned to
Door Box) [0]
(0=Uninstalled, 1=24-Button, 2=110 Button) [0]
(1-4) [1]
(1-15) [Extension 300=1, All others=2]
(1-7, 0=No restriction) [0]
(1-7, 0=No restriction) [0]
(0-5) [Extension 300=5, All others=3]
(Any valid extension number) [300]
(0=No overflow, 1=Busy/DND Overflow, 2=Ring No Answer Overflow, 3=Busy/
DND and Ring No Answer Overflow) [0]
1800 - Extension Options
Name Programming Chart on page 199
To do this:
Chapter 3: Programming ◆ 201
3
.