Mitsubishi Electric MELSEC-Q Series User Manual page 154

9 PARAMETER LIST
Default Value
—
No setting
No setting
—
100 ms
10.0 ms
No setting
Disabled
Previous status (produce the status of
an output (X) before STOP
16 points
No setting
I28: 100.0 ms
I29: 40.0 ms
I30: 20.0 ms
I31: 10.0 ms
The high-speed execution is disabled. Enable/Disable the high-speed execution.
The start of an intelligent-function
module is synchronized.
—
200 ms
Stop
Checked
No setting
9 - 4
Setting Range
Max. of 10 characters
Max. of 64 characters
1 ms to 1000 ms(1 ms units)
0.1 ms to 100.0 ms
X0 to X7FF
Enabled/Disabled
Produce the status of an output (X) before STOP/Clear the
output (output is 1 scan later)
Q00JCPU: 16 points, 32 points, 64 points, 128 points,
256points
Q00CPU/Q01CPU: 16 points, 32 points, 64 points, 128
points, 256 points, 512 points, 1024
points
C0 to C13408 (Counter setting points can be set up to 128.)
2 to 1000 ms (1 ms units)
Yes/No to synchronize the start of an intelligent-function
module.
10 ms to 2000 ms (10 ms units)
Stop/Continue
Checked/Not checked
1 ms to 2000 ms(1 ms units)
—
—
—
MELSEC-Q
Reference Section
—
—
—
—
Section 10.2.10
Section 10.2.10
Section 7.6.1
Section 7.6.3
Section 7.4
Section 5.6.1
Section 10.2.11
Section 10.10
Section 4.1.3
—
—
Section 4.2.2
Section 7.1.5
Section 7.15
Section 7.2
9 - 4