Hitachi GS4000 Series Installation Manual page 71

Hide thumbs Also See for GS4000 Series:
Table of Contents

Advertisement

(3) NE1G-6G
The NE1G-6G is a Network Interface providing 6 Ethernet ports (1000BASE-SX/1000BASE-
LX/1000BASE-LH).
*
Front View
The LED indicators are listed in Table 1.6-4
LEDs
Figure 1.6-4
LEDs
Table 1.6-4
Name
Color
STATUS
Green/Yellow/Red
G: LINK 0~5
Green/Yellow
Y: LINE ERR
0~5
U S2
Green
U S3
Green
D S2
Green
D S3
Green
520-10-026-30X
NOTE: GBIC is required when using NE1G-6G. See the section 1.8 "GBIC, SFP, XFP" for
information about GBIC.
Front Panel of the NE1G-6G
LED Indications on the NE1G-6G Front Panel
Role
Shows the action status of
NIF.
Shows the action status of
an interface line.
Shows the processing status of packets (for hardware debugging).
GS4000 Installation Guide Revision 4.00
Ethernet Port
Action Status
Green (ON): operation possible.
Yellow (ON): locked out
Green (blinking): in preparation for startup
Red (ON): failure detected
OFF: NIF powered off(NIF exchangeable)
Green (ON): link established
Green (blinking): link established or frames being
sent/received
Yellow (ON): failure detected
OFF: When STATUS LED is green (ON);
--link failure, locked out
1-53

Advertisement

Table of Contents
loading

Table of Contents