GS4000 Installation Guide Revision 4.00
Step 2
Insert the NIF into the slot until it reaches the position indicated in the figure
below, and fold its levers to the indicated direction. The NIF will be inserted into the slot
completely.
Lever
Figure 5.7-6
*
Step 3
Fasten the screws of the NIF.
!
Step 4
Attach the network interface cable to the NIF.
For the attachment of an interface cable, see section 4.11 "Connecting Interface Cables to the
GS4000."
5-52
Lever
Network Interface Being Locked
NOTE: When inserting a NIF into the slot, do it holding its levers so that its connector
part is fixed into its position correctly. When moving levers, do it slowly without
giving much pressure to them.
Caution: Use a driver when attaching a Packet Switching Unit, and make sure that it is
fixed into its position firmly.
520-10-026-30X