Table of Contents
Advertisement
Step 4
Loosen the screws of the cable clamp.
Cable Cramp
Figure 4.5-15 Loosening the Cable Clamp
Step 5
Put the DC power cable through the cable clamp, and then mount its terminals
with screws in the order of earth (ground) terminal (first), 0V terminal (second) and –48/-60
terminal (third).
－48V/-60V Terminal
DC Power Cable
Figure 4.5-16 Securing the Terminals
WARNING: WHEN CONNECTING THE DEVICE TO THE DC POWER SUPPLY, USE THE
520-10-026-30X
Screw (M5)
0V Terminal
Cable Clamp
Ground Terminal
When using the earth
terminal having two
holes, fix it with two
screws as shown in
the figure on the right.
EARTH (GROUND) TERMINAL TO AVOID AN ELECTRIC SHOCK OR THE
TROUBLE RELATED TO ELECTRIC NOISES.
GS4000 Installation Guide Revision 4.00
Screw (M6)
Ground Terminal
Screw (M6)
4-27
Advertisement
Table of Contents
