Setting⑬: Mono Mode - Mitsubishi Electric KD Series User Manual

Address Register name
7110 MonoModeSelect
*Val = 2 and 3 of this function are added for the DeviceFirmwareVersion 3.*.*.* or later.
5-2-14 Mono mode
[Function]
Select and switch a type of output image data when output
format when you set Output format to be Mono mode.
Output data : Green pixel output, Luminance value output
Luminance value＝77/256×R＋150/256×G＋29/256×B
[Remark]
When you select RGB color mode and set
"MonoModeSelect=1" (Luminance value), each of R, G,
and B pixels outputs becomes the luminance value,
providing monochrome image.
TM-XH719C
5-2 Setting⑬: Mono mode
R/W Val
R/W 0 to 3
COPYRIGHT©2017-2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
Select Mono mode
(This function can change the output of RGB color mode.)
Mono mode 0: Green pixel output, 1: Luminance value output
2: R pixel output, 3: B pixel output
RGB color mode 0: Color output, 1: Luminance value output
2: Can not be selected, 3: Can not be selected
Result Initial
0
85