Mitsubishi Electric KD Series User Manual page 107

【 KDCX24VPW setting】
[Remark]
①Mount this product on your system by using 4 screw holes on the
base of this power supply unit.
②Use a screw shorter than 8mm.
③ Housing is made of aluminum. Avoid damaging the screw thread.
Screw material
Metal (Strength 4.6)
Stainless (SUS 304)
Brass (C3601BD)
④Fix the position of the attached cables. Keep the cable position
unmoved. Avoid any causes of the defective operations by a bad
connection or disconnection.
TM-XH719C
Appendix D: Spec - Power supply unit (optional)
4 - M3 screw hole
Torque Reference
value [N・cm]
72 ± 7
63 ± 6
42 ± 4
COPYRIGHT©2017-2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
107