Mitsubishi Electric KD Series User Manual page 63

3-3-3 CoaXpress® connectors
(This cable is not included in the CIS product)
1）Connect CoaXpress® cable to D1 to D8.
* CIS has DIN 1.0/2.3 connectors
Type
CoaXpress® connectors
(About L2(KD6R587CXS) is
written in [ ]. It does not have
Slave system and D5-8
connectors.)
*◎: Master port
*●: Slave port
TM-XH719C
3-3 Connections
No. Model
L1 L2
D1
◎ ◎
D2
○ ○
D3
○ ○
D4
○ ○
D5 ● [×]
×
D6 ○ [×]
×
D7 ○ [×]
×
D8 ○ [×]
×
CoaXpress® is a trade mark registered by JIIA (Japan Industrial Imaging Association).
COPYRIGHT©2017-2020 MITSUBISHI ELECTRIC CORPORATION. ALL RIGHTS RESERVED.
【Remarks】
1) When you use several Grabber boards, the external
sync signal can be provided only through Master port
(D1). Also communication control for the main
functions can be set only through Master port. (D1)
Remark when changing Grabber board settings.
2) CIS does not support PoCXP. Set the Frame Grabber
board settings NOT to supply +24V power over the
CoaXpress® cable.
L3
◎
○
○
○
●
○
○
○
63