Md/Disc Messages - JVC NX-DD30 Instructions Manual

MD/Disc Messages

Reference
MD message
The track has already been in the selected
CANNOT ENTRY!
group.
CANNOT FORM! There is a group between the selected tracks.
There is no space for storing more group
information.
CANNOT GROUP!
(Group information is stored in the same area
as title information.)
You are trying to join tracks that have different
CANNOT JOIN MDLP modes (SP/LP2/LP4), or tracks of only 8
or less seconds (in SP mode).
You are trying to adjust the volume during high
CANNOT LISTEN
speed recording.
You are trying to operate one-track-recording
CANNOT REC
with a VCD or SVCD during PBC playback.
You are trying to enter a total of 1793 or more
CANNOT TITLE
characters to an MD.
READ ERROR The main unit cannot read the MD.
There is no more space in the MD, or you are
DISC FULL
trying to record 255 or more tracks.
DISC PROTECTED The MD is write-protected.
EMERGENCY
A malfunction occurred during recording.
STOP
GROUP FULL You are trying to form 100 or more groups.
You are trying to form a group with a track
GROUP TRACK
already belonging to another group.
LOAD ERROR The MD is not properly loaded.
MD NO DISC No MD is loaded.
You are trying to edit or record to an MD which
PLAYBACK DISC
is designed only for playback.
SCMS CANNOT You are trying to make a digital audio duplica-
COPY tion of a CD-R or CD-RW.
You are trying to divide, join, or erase tracks
which are recorded in the Net MD format.
TRACK
PROTECTED
The tracks are write-protected by equipment
other than this product.
You are trying to record a track with the high
HCMS CANNOT speed recording function within 74 minutes of
COPY starting to record the same track with the high
speed recording function.
BLANK DISC There are no tracks in the MD.
Disc message
You are trying to play back an unplayable disc or
CANNOT PLAY
a disc that has many scratches.
NO DISC No disc is loaded.
NO AUDIO The disc may be an illegally copied disc.
You are playing back a multi-channel track for
which down-mix is prohibited.
LR ONLY
The surround is turned "OFF" or headphones
are connected to the main unit.
You are trying to turn the surround "OFF" while
MULTI CH multi-channel sound where down mix is not
allowed was being played.
73
Meaning
Meaning
Possible solution
Select an appropriate track. (
Select appropriate tracks. (
You cannot form a group any more on the MD.
(Erase the disc or track titles you do not need.)
The MD system restricts such operation.
You cannot listen to sound from a CD during
high speed recording.
Set PBC to off ( page 24).
You cannot enter more titles.
Turn off the main unit. If the same message
appears again, the MD may be damaged.
Replace the MD.
Replace the MD. ( page 71).
Close the write protect knob on the MD.
( page 72).
Press to quit recording, press
the MD, and then start recording again.
You can form up to 99 groups.
Select tracks that do not belong to any groups.
( page 60)
Insert the MD properly.
–
Replace the MD with a recordable MD.
Operate analog recording at normal speed.
( page 51)
Edit the tracks on equipment compatible with
Net MD.
Edit the tracks with the equipment on which the
tracks were recorded.
Wait 74 minutes, or change from high speed
recording to normal speed recording.
–
Possible solution
Replace the disc.
–
You cannot listen to the disc.
This is normal operation.
Set the surround mode and play back the disc
with headphones being disconnected.
This is normal operation.
If you wish to play the sound with surround
"OFF", pause once, turn surround "OFF" and
then restart.
Introduction
page 61)
page 60)
to eject