Audio; Others - JVC NX-DD30 Instructions Manual

AUDIO

Items Contents (
DIGITAL Select an output signal type from the following
AUDIO in accordance with the equipment connected to
OUTPUT the digital audio output terminal (AV amplifier,
etc.). (See the list below for the preference
items and output signal.)
PCM ONLY:
Equipment corresponding only to linear PCM.
DOLBY DIGITAL/PCM:
Dolby digital decoder or equipment having the
same function.
STREAM/PCM
DTS/Dolby digital decoder or equipment having
the same function.
DOWN MIX Switch signal from the digital output terminal of
the DVD VIDEO according to the connected
equipment. Select this when "DIGITAL AUDIO
OUTPUT" is set to "PCM ONLY".
DOLBY SURROUND:
A dolby pro logic decoder-built-in equipment.
STEREO :
An ordinary equipment.
D (Dynamic). To make adjustments for the difference
RANGE between a high volume and a low volume when
COMPRESSION playing back with low volume (only for a DVD
recorded with Dolby digital).
:
AUTO
D. range compression automatically works.
ON:
D. range compression always works.
List of relationships of DIGITAL AUDIO OUTPUT preference items and output
signal
Playback disc
48 kHz, 16/20/24 bits
Linear PCM DVD VIDEO
96 kHz linear PCM DVD VIDEO
48/96/192 kHz,
16/20/24 bits linear PCM DVD AUDIO*
44.1/88.2/176.4 kHz,
16/20/24 bits linear PCM DVD AUDIO*
DTS DVD VIDEO/DVD AUDIO*
DOLBY DIGITAL DVD VIDEO/
DVD AUDIO*
CD/VCD/SVCD
DTS CD
MP3/WMA/DivX disc
NOTE
* There is no output for DVD AUDIO with content protection set.
• For a DVD VIDEO without content protection set, there is a 20 bit or 24 bit output at the digital audio output terminal.
: initial setting)
:
STREAM/PCM
DTS bit stream
DOLBY DIGITAL bit stream
44.1 kHz, 16 bits stereo linear PCM/48 kHz, 16 bits linear PCM
DTS bit stream

OTHERS

Items Contents (
RESUME Select
ON
ON SCREEN Select
ON
GUIDE icons, refer to page 24.)
AV COMPU When you want to control JVC TV by using this
LINK MODE product, select a mode that matches the
terminal from the following. (For more details,
refer to "Using AV COMPU LINK" on page 70.)
DVD1 :
Connect to the video-3 input on the TV set.
DVD2:
Connect to the video-1 input of the TV set.
DVD3:
Connect to the video-2 input of the TV set.
DivX The DVD player has its own registration code.
REGISTRATION You can confirm the registration code, when
necessary. Once you have played back a disc
in which the registration code is recorded, the
registration code of the DVD player is
overwritten for copyright protection.
DIGITAL AUDIO OUTPUT preference
DOLBY DIGITAL/PCM
48 kHz, 16 bits stereo linear PCM
48 kHz, 16 bits stereo linear PCM
44.1 kHz, 16 bits stereo linear PCM
48 kHz, 16 bits stereo linear PCM
44.1 kHz, 16 bits linear PCM
32/44.1/48 kHz, 16 bits linear PCM
Introduction
: initial setting)
or OFF. ( page 25)
or OFF. (For details on the guide
PCM ONLY
48 kHz, 16 bits stereo linear
PCM
42