Table of Contents
Advertisement
(Continued)
Recording Sound to MDs
Recording Only One Track
from a Disc
(Excluding DVD VIDEOs)
Before proceeding to step 6, start
playback of the track you want to
record.
• Pressing
in step 6 returns playback to
the beginning of the track, and only that
track is recorded.
• This one-track recording is not available for
DVD VIDEOs or DVD VRs.
Recording the Second or
Subsequent Track to the Last
Track from a Disc
■When recording CDs/VCDs/SVCDs/DVD
VIDEOs/DVD VRs
(For DVD VR: only when recording in the
original program)
(For DVD VIDEO or DVD VR: while the
playback is paused)
Before proceeding to step 6, select the
starting track or chapter number by
pressing
or
■When recording DVD AUDIOs/MP3s/
WMAs
Before proceeding to step 6, select the
group number by pressing
, and then select the track
number by pressing
Program Recording from a
Disc
Before performing step 1 on page 52,
program the tracks you want to record
(
page 47).
• Select normal speed recording (
on page 52).
When you select "×5 SPEED" and proceed
to step 6, "CANNOT REC × 1 REC ONLY"
appears in the display window and record-
ing does not start.
53
.
or
or
.
step 5
Changing the Display in the
Display Window during
Recording
Press
.
• Each time you press
changes as follows.
Clock display
Recording Sound from Radio
or Other Equipment
NOTE
• The recorded sound level is automatically adjusted.
• Sound-synchronized recording is employed for
recording sound from other equipment (LINE).
With sound-synchronized recording, this product
automatically identifies sound signals from the
sound source and starts recording. When sound
from the sound source pauses for 30 or more
seconds, this product automatically quits record-
ing. The blank time between the last recorded
track and the next recorded track is approxi-
mately 2 seconds.
, the display
Advertisement
Chapters
Table of Contents
