Connecting The Speakers - JVC NX-DD30 Instructions Manual

Connecting the Speakers

Connect the speaker plug to the speaker terminal of the same color.
The cord with a black line is connected
to the negative terminal.
CAUTION
• Do not short-circuit the
nals. Doing so may damage the speakers.
• The front speaker cord with a black line is to be
connected to the negative terminal. Properly con-
nect the cords to the
• Fully insert the speaker cord plugs into the
speaker terminals on the rear of the main unit.
• The speakers of this product are magnetically
shielded, but color irregularities may occur on the
TV depending on how the speakers are installed.
Keep in mind the following.
1. Turn off the main power of your TV before
installing the speakers. Wait for about 30 min-
utes before turning on the TV again.
2. If color irregularity occurs in pictures, keep a
distance of more than 10 cm between the TV
and the speakers.
Main unit (rear view)
and speaker termi-
and speaker terminals.
After connecting the speakers, gently pull on the
speaker cords to make sure that they are firmly
connected.
NOTE
• Improper speaker cord connection spoils the stereo
effect and sound quality.
• The impedance of speakers connected to this
product must be within the range of 4 Ω to 16 Ω.
• Cooling fan is built into the main unit for emitting
generated heat. The internal cooling fan auto-
matically rotates and stops. To ensure sufficient
cooling, leave a space of more than 1 cm
between the main unit and the speakers or other
objects.
14