Storing Radio Stations (Preset); Tuning In To A Preset Radio Station; Changing The Display In The Display Window - JVC NX-DD30 Instructions Manual

(Continued)
Listening to Radio Broadcasts
Storing Radio Stations
(Preset)
You can store up to 30 FM radio stations and up to
15 AM radio stations.
■While the broadcast from the radio station
you want to preset is being received
1
Set the remote control mode
selector to AUDIO.
2
Press .
• "SET" flashes for approximately 5 seconds.
3
While "SET" is flashing, press the
number buttons (
) to select the preset number
you want to use.
• Refer to "Using the number buttons"
( page 18).
4
While the selected number is
flashing, press
• "STORED" appears and the selected radio
station is stored.
NOTE
• When you store a radio station to a preset number
to which another radio station has previously been
stored, the newly set radio station replaces the pre-
viously stored radio station.
Tuning in to a Preset Radio
Station
■While an FM or AM broadcast is being
received
1
Set the remote control mode
selector to AUDIO.
2
Use the number buttons to select
the preset number of the radio sta-
tion to which you want to tune in.
• Refer to "Using the number buttons"
( page 18).
• You can also select the preset number by
pressing or
21
- , or
.
.
For the locations of remote control
buttons, refer to page 20.
Changing the Display in the
Display Window
Press .
• Each time you press
changes as follows.
Display while a radio
broadcast is being
received (
(Time display)
Clock display
Introduction
, the display
page 20)
(With an MD loaded)
Display of remaining
time for MD recording