Connecting With A Tv; When A Clearer Picture Is Desired - JVC NX-DD30 Instructions Manual

Connecting with a TV

TV
Supplied video cord
VIDEO IN
CAUTION
• Connect the main unit directly with a TV (or a
monitor) without routing through a VCR. Otherwise
it may cause picture distortion while playing back.
(Such picture distortion is caused by a copy
protection system, and thus it is not a malfunction.)
Main unit
OUTPUT PHONES/
MODE LINE OUT
STANDBY
for Digital Audio Player
DISC LOADING MECHANISM
MD IN
LINE REC SURROUND --- VOLUME +
MODE
DVD/CD MD
FM/AM
Connecting directly
Also, if the main unit is connected to a TV with a
built-in VCR, there may be picture distortion during
playback.
NOTE
• You need to set "MONITOR TYPE" in the
"PICTURE" menu correctly according to the aspect
ratio of your TV. (
When a Clearer Picture Is
Desired
You can enjoy pictures of better quality using the
following cord instead of the supplied video cord.
Connecting by using the S-video cord
S-video cord
TV
(not supplied)
Connect the ends of S-video cord making
sure that each end matches its compatible
terminal.
Main unit
(rear view)
TV
VCR
(or monitor)
page 41)
Main unit
(rear view)
Connecting by using the component
video cord
You can enjoy better quality pictures than when
using the S-video cord.
TV
Main unit (rear view)
CAUTION
• Use one of either the S-video cord or the compo-
nent video cord. If both cords are used, pictures
may not be played back properly.
NOTE
• In order to enjoy pictures with the progressive
mode ( page 30), the TV is required to have
progressive video input.
• If the component video input jacks of your TV are
BNC type, use a plug adapter (not supplied) to
convert the plugs.
Component video cord
(not supplied)
16