Connections; Connecting The Antennas - JVC NX-DD30 Instructions Manual

Connections

Connecting the Antennas

Connecting the AM antenna
1
Set up the AM antenna (supplied).
2
Connect the antenna cord.
Main unit (rear view)
Black
When insulation covers the tips
of the antenna cord, twist and
pull off the insulation.
3
Turn the AM loop antenna to find
the best position for radio
reception.
Place the AM loop antenna as far
from the main unit as possible.
• Do not place the AM loop antenna on a
metallic table or close to a TV, computer, or
other electric appliances. Doing so may
affect radio reception.
■When radio reception with the supplied AM
loop antenna is poor
Twist together vinyl-
covered wire and the AM
loop antenna cord.
Main unit (rear view)
When positioning the antennas, find the best position for reception while listening to an actual radio program
(refer to "Listening to Radio Broadcasts" (
13
Connect all necessary parts before connecting the power plug.
Insert the tab into
the slot.
White
Vinyl-covered wire: 3 - 5 m
(not supplied)
Stretch out the vinyl-
covered wire
horizontally, preferably
in a high place such
as above a window or
outdoors.
Connect the AM loop
antenna cord to the
main unit together with
the vinyl-covered wire.
page 20)).
Connecting the FM antenna
Main unit (rear view)
Stretch out the FM antenna to the best position for
radio reception, and then fix it with adhesive tape.
STANDBY
LINE
DVD/CD FM/AM
■When radio reception with the supplied FM
antenna is poor, or when using a communal
antenna
Antenna cord
(not supplied)
or
Main unit
(rear view)
When using an antenna other than those
supplied with this product, refer to the operation
manuals for the antenna for details of
connection.
Introduction
FM antenna
(supplied)
OUTPUT PHONES/
MODE LINE OUT
for Digital Audio Player
DISC LOADING MECHANISM
MD IN
SURROUND
REC --- VOLUME +
MODE
MD
Communal
antenna terminal
Outdoor FM antenna
(not supplied)
Coaxial cable
(not supplied)