Listening To Other Equipment; Changing The Display In The Display Window - JVC NX-DD30 Instructions Manual

Listening to Other Equipment

1
Press .
• Each time you press
changes as follows.
LINE : To listen to sound from
other equipment connected
to the LINE IN terminals on
the main unit.
LINE-DIGITAL1 : To listen to sound from
other equipment connected
to the DIGITAL 1 terminal
on the main unit.
LINE-DIGITAL2 : To listen to sound from
other equipment connected
to the DIGITAL 2 terminal
on the main unit.
Listening to MDs/Listening to Other Equipment
, the display
2
Start other equipment playback.
• Refer to the operation manual for the con-
nected equipment.
3
Adjust the volume and make other
necessary settings.
• For adjusting the volume and making other
necessary settings, refer to "Basic Opera-
tions" ( page 18).
Changing the Display in the
Display Window
Press .
• Each time you press
gles as follows.
Sound source name
(Time display)
Clock display
Introduction
, the display tog-
(With an MD loaded)
Display of remaining
time for MD recording
50