Panasonic EBL512 G3 Planning Instructions page 151

Panasonic Eco Solutions Nordic AB
MEW01472
Analog smoke detector 2300/2304 + analog base 2312
Analog smoke detector 3304 + analog base 3312
Analog heat detector 3308 + analog base 3312xx
Analog heat detector, enclosed 3309
Addressable heat detector, enclosed 2340 / 2341
Analog multi detector 3316 + analog base 3312
Analog multi detector 4300 + analog base 3312xx
Analog smoke detector 4301 + analog base 3312xx
Addressable manual call point 2333 / 3333 / 3339
Alarm Acknowledge Facility Control (AAFC)
NOTE! On each COM loop, up to 5 sensors / detectors can have their LEDs lit at the same time.
COM loop units (output units, etc.)
Addressable short circuit isolator 4370
Analog base with isolator 4313
Addressable zone interface 2335
Addressable multipurpose I/O unit 3361
Addressable 2 voltage outputs unit 3364
(Addressable) External power supply 3366
Addressable siren 3377
Addressable sounder base 3379
Addressable beacon 4380
I/O matrix board 4582
Fan control application board 4594
Rev: - Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x
123
Extern LED current consumption. 2216: add 2 mA. 2217 / 2218: add 1
mA.
Analog base with isolator 4313 can be used instead of Analog base 3312.
124
This unit is available on the Australian market only.
125
Detector not included.
126
Only if the input In 0 is used as a zone line input, else approx. 2.2 mA.
127
External 24 V DC power supply also required, e.g. the 3366 unit.
128
Two 4594 boards are mounted on a Fan control panel 4594. 24 V DC
power supply also required.
123
1.7 / 1.8
123
0.3
123
0.3
123
0.2
123
2
123
0.55
123
0.3
123
0.3
2
124
2
Normal state
(quiescent) (mA)
2.2
125
< 1.3
5
2.2
127
<6
<15
1
0.75
1.7
max. 6
128
4-6
149
3.7 / 3.8
2.3
2.3
1.7
5
2.55
2.3
2.3
5
5
Alarm state
(activated) (mA)
2.2
< 1.3
20
126
max. 12
<6
<15
max. 13
max 3
4-5
max. 6
4-6