Log Events; Log Setup; Control Unit Information - Panasonic EBL512 G3 Planning Instructions

Panasonic Eco Solutions Nordic AB
MEW01472 Rev: -
20.2
20.3
20.4
Planning Instructions Fire alarm system EBL512 G3, United version 2.7.x

Log events

Not valid for EBL512 G3 since all events always will be logged in
three different type of logs.
The general event log can be shown / printed out via menu H4/U6.
The fire alarm log can be shown / printed out via menu H4/U6.
The interlocking log can be shown / printed out via menu H4/U6.
All three logs are circular and can show up to 999 events each.

Log setup

Not valid for EBL512 G3. See above.

Control unit information

In this tab you can read the following information:
Logical name
Control unit (number)
No. of expansion cards
No. of addresses
No. of alarm points (detectors in conventional zones excluded)
No. of alarm points (detectors in conventional zones included)
No. of zones
When a name / number / unit is changed, added or removed, this
information will be updated.
132