Check The Signal Communication From Ysp10 To Its Upstream Machine - Yamaha YSP10 Service Information

In the right pane, edit settings under [Software].
Note
When connecting a YAMAHA Xg series or later machine with YSP10, select "ADVANCED GATE".
For further information, see "SI1004008E: General procedures for carrying in and installing a
machine", "4.4.2. The setting for the specification of the signal lines".
Save the setting and close the VmSpec screen. Reload board data to enable the
new setting.

10.3. Check the signal communication from YSP10 to its upstream machine

Check that the board transfer signals are communicated properly.
Execute automatic operation on YSP10 in the skip mode.
Specify the skip mode by selecting [Board] > [Print Execution] > "Skip". In the skip mode automatic
operation, boards are transferred through the machine without production process.
Check that the upstream machine receives the board request signal properly.
Note
At present there is no YAMAHA machine product that serves as an upstream machine of YSP10,
thus the upstream machine is always a non-YAMAHA machine. Be sure to ask the customer or the
machine maker's service representative to perform this task.
SI1906002E-001=YSP10 installation and adjustment procedures
48/120
For Service Engineers
Service Information