Procedures After Installation And Adjustment Work; Reinstall Machine Covers; Move The Maintenance Board Data To A Safe Location; Time Setting Of Windows Os - Yamaha YSP10 Service Information

14. Procedures after installation and adjustment work

14.1. Reinstall machine covers

Reinstall the machine covers removed for installation and adjustment work.
The lower right cover (upon connecting power supply)

The rear side lower cover (upon line alignment / connecting signal harnesses)

The power supply cover of air conditioning unit / CE transformer cover (upon connecting power

cables to the air conditioning unit)

14.2. Move the maintenance board data to a safe location

To prevent misuse of the maintenance board data used for installation adjustment, move the board data
from "D:/Machine/No1" to "D:/Machine/CalibPCBdata".

14.3. Time setting of Windows OS

The time setting of Windows OS is set at "UTC+9 JST" upon shipping. Changing its time setting
matching to that of countries or territories makes the backup and log data to be displayed or generated in
correct date.
Perform time setting of Windows OS by the following procedure.
1. Turn the machine OFF after closing applications.
2. Turn the machine ON.
3. Select " Windows Mode" by pressing the [Windows Mode] button in the screen below.
SI1906002E-001=YSP10 installation and adjustment procedures
115/120
For Service Engineers
Service Information