Connect The Air Hose To The Machine - Yamaha YSP10 Service Information

Connect the power cable to the power connecting terminal.
Warning
Electrical wiring work shall be performed by a certified electrician.
Tips
The power input terminal of YSP10 can be connected with M5-sized round terminal or fork-tongue
terminal. Select only round terminal for ground wire.

7.2. Connect the air hose to the machine

Connect the air hose mounting the coupler on the tip to the inlet of air filter placed in the lower left door.
Fix the air hoses if necessary using cable ties.
Tips
The standard connector for YSP10: Coupler, 30SH made by NITTO KOHKI co. ltd,.
Connecting unit of
air hose
Coupler
Cable tie
Power connecting terminals: M5
Power cables arrangement
Round crimp terminal M5
Ground terminal (green)
SI1906002E-001=YSP10 installation and adjustment procedures
29/120
For Service Engineers
Service Information