Install The Stylus And Its Holder - Yamaha YSP10 Service Information

Connect harnesses to the monitor.
1. From the cable outlet on the back of the monitor, 3 harnesses connecting to the monitor come out.
Fix the harnesses at the nylon clip using cable ties.
2. Connect each harnesses to each sockets on the back of the monitor.
3. Arrange and fix the harnesses using cable ties.
Nylon clip
Note
First, temporarily tighten the cable ties, arrange all the harnesses and then fix them.

6.2.1. Install the stylus and its holder

Install the stylus holder at the lower right part of the operation monitor.
SI1906002E-001=YSP10 installation and adjustment procedures
26/120
For Service Engineers
Service Information