Lenovo ThinkSystem D2 Manual page 24

Enclosure, modular enclosure, modular enclosure for 6u configuration and thinksystem sd530 compute node messages and codes reference
Hide thumbs Also See for ThinkSystem D2:
Table of Contents

Advertisement

1. Check power supply LEDs
– If AC LED is not lit, check power cord and input voltage.
– If DC LED is not lit, remove and reinstall power supply.
– If error LED is lit, replace the power supply.
2. If fault recurs, please call service.
• 086F01A0: PS1_OVS_ERROR: Power Supply, Power Supply Failure detected was asserted.
The power supply shutdown due to throttle# assertion over 3 seconds for indicating a load over 105% of
the power supply rating
Severity: Critical
User Action:
1. Check power supply LEDs
– If AC LED is not lit, check power cord and input voltage.
– If DC LED is not lit, remove and reinstall power supply.
– If error LED is lit, replace the power supply.
2. If fault recurs, please call service.
• 086F01A1: PS2_OVS_ERROR: Power Supply, Power Supply Failure detected was asserted.
The power supply shutdown due to throttle# assertion over 3 seconds for indicating a load over 105% of
the power supply rating
Severity: Critical
User Action:
1. Check power supply LEDs
– If AC LED is not lit, check power cord and input voltage.
– If DC LED is not lit, remove and reinstall power supply.
– If error LED is lit, replace the power supply.
2. If fault recurs, please call service.
• 086F01A6: PS1_VIN_UVI_ERR: Power Supply, Power Supply Failure detected was asserted.
The input power applied does not exceed the Turn-On voltage
Severity: Critical
User Action:
1. Check power supply LEDs
– If AC LED is not lit, check power cord and input voltage.
– If DC LED is not lit, remove and reinstall power supply.
– If error LED is lit, replace the power supply.
2. If fault recurs, please call service.
• 086F01A7: PS2_VIN_UVI_ERR: Power Supply, Power Supply Failure detected was asserted.
The input power applied does not exceed the Turn-On voltage
Severity: Critical
User Action:
1. Check power supply LEDs
– If AC LED is not lit, check power cord and input voltage.
– If DC LED is not lit, remove and reinstall power supply.
– If error LED is lit, replace the power supply.
2. If fault recurs, please call service.
• 086F01AC: PS1_INTRL_OC_ERR: Power Supply, Power Supply Failure detected was asserted.
20
ThinkSystem D2 Enclosure, Modular Enclosure, Modular Enclosure for 6U Configuration and ThinkSystem SD530 Compute Node
Messages and Codes Reference

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7x207x217x22

Table of Contents